用户工具

站点工具


5.0_inch_rpi_lcd-jrp5002

这是本文档旧的修订版!


5.0 inch RPi LCD-JRP5002

产品图片

Introduction

800×480, 5.0 inch Touch Screen TFT LCD Designed for Raspberry Pi/MiniPC/etc.HDMI.

Features

  • Wide viewing angle LCD
  • 800×480 hardware resolution,maximum HDMI resolution 1920×1080 is supported
  • Capacitive touch screen, support 5 point touch maximum
  • With Mini HDMI interface
  • Built-in OSD menu adjustment function (adjustable Contrast/ Brightness/Saturation, etc.)
  • It is compatible with mainstream mini PC such as Raspberry Pi, BB Black, Banana Pi
  • Used as a Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, Win10 IOT, single-touch, free drive
  • It can also be used as a general-purpose HDMI display, connecting computers, TV boxes, Microsoft Xbox360, SONY PS4, Nintendo Switch and so on
  • Work as a PC monitor, support Win7, Win8, Win10 system 5 point touch (XP and older version system: single-point touch), free drive
  • High quality immersion gold surface plating
  • Support HDMI audio output

Parameters

Name Parameter
Screen Size 5.0(inch)
SKU JRP5002
Display Color RGB 16.7M color
Type TFT.TN
Driver IC
Resolution 800*480 (Pixel)
Module Interface HDMI interface
Outline Dimension 121.01*78.13 mm
Active Area Dimension 108*64.08 mm
VCC power voltage 5.0V
Power Consumption 560mA@5.0V
Weight(No packaging)

Use with Raspberry Pi

Install image

  1. Download the latest image from the official
  2. Install the system according to the official tutorial steps

Modify the “config.txt”

After the programming of Step1 is completed, open the config.txt file of TF card root directory and add the following code at the end of the file, save and eject Micro SD Card safely:

    hdmi_force_edid_audio=1
    max_usb_current=1
    hdmi_force_hotplug=1
    config_hdmi_boost=7
    hdmi_group=2
    hdmi_mode=1
    hdmi_mode=87
    hdmi_drive=1
    hdmi_cvt 800 480 60 6 0 0 0

Drive Pi

Insert the TF Card to Raspberry Pi, connect the Raspberry Pi and LCD by HDMI cable; connect USB cable to one of the four USB ports of Raspberry Pi, and connect the other end of the USB cable to the USB port of the LCD; then supply power to Raspberry Pi; after that if the display and touch both are OK, it means drive successfully (please use the full 2A for power supply).

Use as PC monitor

  1. Connect the computer HDMI output signal to the LCD HDMI interface by using the HDMI cable
  2. Connect the LCD's USB Touch interface (Either of the two MicroUSB) to the USB port of the device
  3. If there are several monitors, please unplug other monitor connectors first, and use LCD as the only monitor for testing

Rotate the display direction

This method only applies to the Raspberry Pi series of display screens, other display screens do not apply

Method 1,If the driver is not installed, execute the following command (Raspberry Pi needs to connected to the Internet):

  sudo rm -rf LCD-show
  git clone https://github.com/lcdgogo/LCD-show.git
  chmod -R 755 LCD-show
  cd LCD-show/
  sudo ./XXX-show 90
  

After execution, the driver will be installed. The system will automatically restart, and the display screen will rotate 90 degrees to display and touch normally. ( ' XXX-show ' can be changed to the corresponding driver, and ' 90 ' can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees)

Method 2,If the driver is already installed, execute the following command:

  cd LCD-show/
  sudo ./rotate.sh 90
  

After execution, the system will automatically restart, and the display screen will rotate 90 degrees to display and touch normally. ( ' 90 ' can be changed to 0, 90, 180 and 270, respectively representing rotation angles of 0 degrees, 90 degrees, 180 degrees, 270 degrees)

If the rotate.sh prompt cannot be found, use Method 1 to install the latest drivers

Resources

User Manual

install_matchbox-keyboard

Image

System Name System Version Supported Raspberry Pi version Default user and passwd Download
Raspbian 2019-09-26 PI4/PI3B+/PI3/PI2/PI1/ZERO/ZERO W user: pi
password: raspberry
MPI5001-5inch-B-raspbian-buster-2019-09-26 Fetch code:w08y
Ubuntu-mate 18.04.2-beta1 PI3B+,PI3,PI2 user: pi
password: raspberry
5inchB-800X480-RPI3-RPI2-ubuntu-mate-16.04-beta2 Fetch code:szc8
Kali Linux RaspberryPi 2,3 and 4 2019.4 PI4B,PI3B+,PI3,PI2 user: root
password: toor
MPI5001-5inch-B-800x480-Kali-2019.4 Fetch code:tpbs

Driver

Software

FAQ

How to install drivers Online

Step 1. Install Raspbian official image

  1. Download the latest Raspbian Image from the official website: https://www.raspberrypi.org/downloads/
  2. Format TF card by SDFormatter
  3. Burn the official image into TF card by using Win32DiskImager

Step 2. obtain the LCD driver Log onto the Raspberry Pi users system to command line (The initial user name: pi Password: raspberry)

Get the newest driver from GitHub(Raspberry Pi LCD should be connected to internet)

  sudo rm -rf LCD-show
  git clone https://github.com/lcdgogo/LCD-show.git
  chmod -R 755 LCD-show
  cd LCD-show/

Step 3. install LCD driver

  sudo ./LCD5-show
  

Wait for a moment after executing the above command, then you can use the corresponding raspberry LCD.

How to install drivers Offline

Step 1. Install Raspbian official image

  1. Download the latest Raspbian Image from the official website: https://www.raspberrypi.org/downloads/
  2. Format TF card by SDFormatter
  3. Burn the official image into TF card by using Win32DiskImager

Step 2. obtain the LCD driver Download from the following address: https://github.com/lcdgogo/LCD-show

Copy the LCD-show.tar.gz drive to the Raspberry Pi system root directory (Suggestion: copy flash driver directly to TF card after completion of Step 1, or copy by SFTP or other methods for remote copy). Unzip and extract drive files as the following command:

  cd /boot
  sudo tar zxvf LCD-show.tar.gz
  cd LCD-show/
  

Step 3. install LCD driver The same as method1-Setp3.

Support

5.0_inch_rpi_lcd-jrp5002.1622630812.txt.gz · 最后更改: 2021/06/02 18:46 由 xuwei